Interceptor Carrier Board

Carrier board for Raspberry Pi CM4/CM5 and Banana Pi CM4 (Mini-ITX compatible with adapter)

The Interceptor Carrier Board is designed to convert a Compute Module (CM4/CM5) into a powerful Network Attached Storage (NAS) or Network Video Recorder (NVR) system. It features a built-in managed switch, SATA controller, and expansion capabilities for Power over Ethernet (PoE). With the optional Mini-ITX Adapter, it can be installed in standard Mini-ITX cases.

Interceptor Carrier Board with Raspberry Pi CM4

Supported Compute Modules

Key Features (v2.0)

FeatureSpecification
Dimensions100mm x 110mm (Mini-ITX adapter available)
Storage5x SATA ports (RAID 0, 1, 5, 6, 10 via JMB585)
Networking4x Gigabit Ethernet (RTL8367RB managed switch)
Video2x Full-size HDMI 2.0 (4Kp60)
USB2x USB 2.0 Type-A + 2x USB 2.0 via header
Expansion2x FFC connectors for PoE boards (up to 16 ports)
Power24-pin ATX connector
OtherMicro SD card slot, RS-485, RTC with battery backup

Applications

  • NAS (Network Attached Storage) - Build a compact, low-power file server
  • NVR (Network Video Recorder) - Manage IP cameras with integrated PoE
  • IoT Gateway - Central hub for IoT devices and sensors
  • Managed Switch - 4-port managed Gigabit switch with PoE expansion

Resources


Getting Started

Initial setup and configuration of the Interceptor Carrier Board

Specifications

Complete technical specifications for the Interceptor Carrier Board v2.0

Hardware Interface

Connector pinouts and hardware interface details

Expansion

Adding PoE boards and expansion options

Software

Operating system and driver information

Troubleshooting

Common issues and solutions for the Interceptor Carrier Board

FAQ

Frequently asked questions about the Interceptor Carrier Board

Last modified January 11, 2026